Cut Polymer Costs. Gain Drier Cake Solids.
Cut chemical costs, boost cake dryness, and run maintenance-free for decades.
The P6 PolyMix™ delivers cleaner, drier results while slashing polymer use and eliminating the clogs and rebuilds that drag your system down.
How? It’s the only system that injects polymer before the pump and mixes it inside—using shear-free viscous drag, not mechanical force.
No shear. No plugging. No waste.
Conventional dewatering systems are built on compromise.
High-shear mixers destroy floc, tight-tolerance pumps clog and stall, and subpar mixing bleeds polymer to maintain performance.
The result? Rising chemical costs, constant maintenance, and inconsistent cake.
Every shutdown, rebuild, and batch of wet sludge eats into your bottom line and makes your system harder to operate and harder to trust.
The P6 PolyMix™ dewatering technology breaks the cycle.
By injecting polymer ahead of the pump and mixing it inside using shear-free viscous drag, we eliminate the weak points—no floc tank, shear valve, or tight tolerances. Just cleaner, more reliable dewatering.
Mixing happens inside the pump—not in a floc tank or valve—using Discflo’s patented viscous drag technology. This preserves floc structure and polymer integrity for cleaner separation and less chemical waste.
Unlike conventional systems, the P6 PolyMix™ injects polymer before the pump. There are no high-shear mixers, floc tanks, or blending equipment to fail—just efficient, reliable chemical conditioning.
The open-disc design handles abrasive, high-solids sludge without plugging or stalling. A double cartridge seal allows safe dry running, even in unpredictable flows.
With no impellers, close tolerances, or contact wear, the P6 PolyMix™ runs for decades with virtually no maintenance. That’s why it’s backed by a 20-year wear warranty—unmatched in the industry.
By preserving polymer structure, the P6 PolyMix™ achieves the same—or better—results with dramatically less chemical. That means lower operating costs and a faster return on investment.
Gentle, uniform mixing improves flocculation and delivers cake solids up to 4% drier. Less water means lighter loads, fewer hauls, and cleaner press operation.
Most systems run at 25–40 PSIG. The P6 PolyMix™ operates at just 5–10 PSIG, easing strain on belts, valves, and piping—and extending the life of your entire system.
No mixers to service. No PD pumps to rebuild. Fewer parts, fewer failures, and longer operating life add up to a drastically lower total cost of ownership.
No clogs. No vapor lock. No foam-outs. The P6 PolyMix™ keeps running even when flows vary or sludge thickens, ensuring continuous uptime and reliable performance.
Perfect for aerobic-digested sludge, ferric sludge, and other high-solids municipal or industrial waste streams.
Compatible with belt presses, centrifuges, screw presses, rotary thickeners, and clarifiers. The P6 PolyMix™ is an innovative sludge-dewatering solution that adapts easily to both municipal and industrial setups.
Trusted in municipal, food, chemical, and pulp-and-paper applications for consistent results in challenging sludge conditions.
